Een stil PVT energiedak voor stroom én warmte
Fossil-free heating day and night, even in winter
See how it worksQ = Next generation heating
An enormous task awaits up. Co2 must be reduced and all buildings have to be energy neutral within a few decades. A task for which we have been developing, producing and supplying products for over 18 years.
We reduce the most CO2 if we consume and generate our electricity, heat and cooling in a sustainable way. This while maintaining or rather improving our comfort. That is exactly what our rock-solid Dutch solution Qsilence offers as a total solution.
With the 3 elements of Qsilence we heat quietly, sustainably and without fossil fuels:
Next generation PVT: Qpanel
The Qpanel is an innovative composition of a Full Black high-quality 330 Wp solar panel with a high-tech thermal heat exchanger as the silent source of the heatpump. The collector consist of aluminum fins with a copper tube system in between. A combination of these two techniques is called PV-T (PhotoVoltaic Thermal).
Comfort, simplicity, scalability and the highest attainable energetic efficiency with maximum CO2 reduction have been decisive for the development of the Qpanel. With years of knowledge gained in developing compact and high-efficiency solar thermal collectors, our R&D team has succeeded in creating a PVT panel that is only 35 mm thin and can be installed on a standard solar panel roof mounting material. A real breakthrough!
-
Follow the (EN) installation guidelines that also apply to PV panels.
-
The Qpanel panels are heavier than solar panels, so take safety legislation, roof load, suitable mounting material and ballast into account.
-
Place the panels facing south as much as possible for the highest performance.
-
Place the panels on one roof surface as much as possible to keep the hydraulics simple. (Ask us for advice in case of different placement).
-
Make sure that the hoses on the roof and inside is properly fixed to prevent sliding and chafing of hoses.
-
Only use hoses, couplings and other prescribed materials from Qsilence.
-
Always place the rail mounting profiles horizontally on-slope roof systems. This ensures the connections and hoses are more accessible and mountable.
-
Insulate all Qpanel hoses (and as many accessories as possible) inside the home up to the heatpump completely vapor-tight to prevent condensation.
-
Insulate the hoses to the outside of the roof to a minimum of 50 cm so no condensation water enters.
-
A filling pump machine is required to fill the system.
Next generation PVT: Qpanel
The Qpanel is an innovative composition of a Full Black high-quality 330 Wp solar panel with a high-tech thermal heat exchanger as the silent source of the heatpump. The collector consist of aluminum fins with a copper tube system in between. A combination of these two techniques is called PV-T (PhotoVoltaic Thermal).
Comfort, simplicity, scalability and the highest attainable energetic efficiency with maximum CO2 reduction have been decisive for the development of the Qpanel. With years of knowledge gained in developing compact and high-efficiency solar thermal collectors, our R&D team has succeeded in creating a PVT panel that is only 35 mm thin and can be installed on a standard solar panel roof mounting material. A real breakthrough!
-
Follow the (EN) installation guidelines that also apply to PV panels.
-
The Qpanel panels are heavier than solar panels, so take safety legislation, roof load, suitable mounting material and ballast into account.
-
Place the panels facing south as much as possible for the highest performance.
-
Place the panels on one roof surface as much as possible to keep the hydraulics simple. (Ask us for advice in case of different placement).
-
Make sure that the hoses on the roof and inside is properly fixed to prevent sliding and chafing of hoses.
-
Only use hoses, couplings and other prescribed materials from Qsilence.
-
Always place the rail mounting profiles horizontally on-slope roof systems. This ensures the connections and hoses are more accessible and mountable.
-
Insulate all Qpanel hoses (and as many accessories as possible) inside the home up to the heatpump completely vapor-tight to prevent condensation.
-
Insulate the hoses to the outside of the roof to a minimum of 50 cm so no condensation water enters.
-
A filling pump machine is required to fill the system.
Next generation PVT: Qpanel
The Qpanel is an innovative composition of a Full Black high-quality 330 Wp solar panel with a high-tech thermal heat exchanger as the silent source of the heatpump. The collector consist of aluminum fins with a copper tube system in between. A combination of these two techniques is called PV-T (PhotoVoltaic Thermal).
Comfort, simplicity, scalability and the highest attainable energetic efficiency with maximum CO2 reduction have been decisive for the development of the Qpanel. With years of knowledge gained in developing compact and high-efficiency solar thermal collectors, our R&D team has succeeded in creating a PVT panel that is only 35 mm thin and can be installed on a standard solar panel roof mounting material. A real breakthrough!
-
Follow the (EN) installation guidelines that also apply to PV panels.
-
The Qpanel panels are heavier than solar panels, so take safety legislation, roof load, suitable mounting material and ballast into account.
-
Place the panels facing south as much as possible for the highest performance.
-
Place the panels on one roof surface as much as possible to keep the hydraulics simple. (Ask us for advice in case of different placement).
-
Make sure that the hoses on the roof and inside is properly fixed to prevent sliding and chafing of hoses.
-
Only use hoses, couplings and other prescribed materials from Qsilence.
-
Always place the rail mounting profiles horizontally on-slope roof systems. This ensures the connections and hoses are more accessible and mountable.
-
Insulate all Qpanel hoses (and as many accessories as possible) inside the home up to the heatpump completely vapor-tight to prevent condensation.
-
Insulate the hoses to the outside of the roof to a minimum of 50 cm so no condensation water enters.
-
A filling pump machine is required to fill the system.
.
De eerste PVT warmtepomp ter wereld
De warmtepomp is voorzien van de nieuwste inverter technologie met modulerende compressor. Dit zorgt ervoor dat het vermogen van de Qbooster perfect wordt afgestemd op de warmtevraag. Dit verhoogt het rendement en verlengt de levensduur van het systeem. De Qbooster warmtepomp zorgt ervoor dat je huis en het douche/badwater de juiste temperatuur bereikt. Een ijskoude winterdag? De warmtepomp 'boost' de energie van het Qpanel PVT systeem naar comfortabele temperaturen met een zeer hoog rendement. Toch een ijskoude bron? Een ingebouwd elektrisch element helpt dan mee zodat het comfort wordt gewaarborgd.
Maintenance-free
To store the hot water, you use the Qstore cylinder. When hot water is required, it comes directly from the storage cylinder. The Qstore is made of stainless steel. This ensures that the Qstore is sustainable. The cylinder also has a long and maintenance-free lifespan.